Fundamentals of CEREC Dentistry (CL2)
| 13 CE Credits Prerequisites: Level 1 or Basic Training from your CEREC dealer Strongly RecommendedOnce you have completed your initial training and viewed the training videos on CDOCS.com, it is time to expand your CEREC knowledge and learn how to make better use of the CEREC technology and 5.2 software. The Fundamentals of CEREC Dentistry hands on workshop allows you to practice fabricating crowns with ideal occlusion with shorter, stress-free CEREC appointments. Designed for new and long-term users alike, the Fundamentals of CEREC Dentistry workshop gives you the skill set necessary to use the software to its fullest capabilities and to continue your modern dentistry education. You will get a thorough review of what it takes to make the CEREC process predictable and efficient from an efficient workflow to a thorough understanding of the software and materials available for CEREC users. All CDOCS hands-on workshops are conducted on Primescans utilizing the most recent software. Patterson and Henry Schein Dental training vouchers accepted.
Staff seating is limited and on a first come, first serve basis. Bringing more than two assistants is highly discouraged due to spacing.
Participants Will Learn:
-
The importance of Prep and Picture, keys to all CEREC success
-
To thoroughly understand each design technique Biogeneric Individual, Biogeneric Copy and copy and mirror
-
To become efficient with inventory and use of the CEREC blocks
-
How to design and mill multiple restorations adjacent and opposing restorations
-
The importance of the Model Axis and other tools with CEREC software
-
How to fabricate chairside temporary bridges
-
The difference between fabricating provisional and permanent bridges
-
How to contour and crystallize permanent bridges
-
The Virtual Articulator function of the software, how to use it and for what clinical situation
-
The range of materials choices and their indications
-
How to mix and match various design techniques, including Biogeneric Individual and Biogeneric Copy for the same patient
-
Advanced techniques to increase the efficiency of your CEREC fabrications
-
How to send your cases to the laboratory using Connect
-
How to manage multi-unit fixed partial denture cases with CEREC, from temporization to digital fabrication of the final restorations
-
A thorough understanding of the bonding protocol and various types of cements available, from self-etching to total etch
Plus:
-
Thorough parameter review
-
Introduction to stain and glaze
-
Complete materials review
-
A comprehensive foundation of CEREC
-
Connect knowledge
-
Clinical application of parameters
-
Thorough software review
Register Now
Cost:
- $3,995 Doctors
-
$1,495
Team Members*
Available at the Scottsdale Campus (Scottsdale, AZ) location
Credits:
- 13 CE Credits
Faculty:
- Mark Fleming D.D.S.
- Shivi Gupta, D.M.D.
- Rich Rosenblatt, D.M.D.
2024 Dates
-
Thu-Fri
April 11-12
Charlotte, NC -
Thu-Fri
April 18-19
Scottsdale, AZ -
Sat-Sun
April 20-21
Scottsdale, AZ -
Sat-Sun
May 04-05
Scottsdale, AZ -
Sat-Sun
May 18-19
Charlotte, NC -
Thu-Fri
May 30-31
Scottsdale, AZ -
Sat-Sun
June 08-09
Charlotte, NC -
Thu-Fri
July 11-12
Scottsdale, AZ -
Sat-Sun
July 20-21
Charlotte, NC -
Thu-Fri
August 01-02
Charlotte, NC -
Thu-Fri
August 15-16
Scottsdale, AZ -
Thu-Fri
September 05-06
Scottsdale, AZ -
Sat-Sun
September 07-08
Scottsdale, AZ -
Thu-Fri
September 12-13
Charlotte, NC -
Sat-Sun
September 14-15
Charlotte, NC -
Sat-Sun
October 12-13
Charlotte, NC -
Thu-Fri
October 24-25
Charlotte, NC -
Thu-Fri
November 07-08
Scottsdale, AZ -
Thu-Fri
November 14-15
Charlotte, NC -
Thu-Fri
December 12-13
Scottsdale, AZ -
Sat-Sun
December 14-15
Scottsdale, AZ
Locations:
CDOCS Campus, Scottsdale, AZ7201 E Princess Blvd
Scottsdale, AZ 85255
Map & Directions
CDOCS Campus, Charlotte, NC
13320 Ballantyne Corporate Place
Charlotte, NC 28277
Map & Directions
Questions?
Give us a call at 877.295.4276 or email us.
Hands-On Workshops
- Overview
- CEREC Mastery For Dental Assistants (CL1)
- Fundamentals of CEREC Dentistry (CL2)
- Provisionalizing and Restoring Implants with CEREC (CL3)
- Anterior Esthetics with CEREC (CL4)
- Comprehensive Restorative Care with a Digital Workflow (CL5)
- Advanced CEREC Software Mastery (CL6)
- The Next Level of Esthetics with CEREC (CL7)
- Introduction to Digital Impressions and 3D Printing (CP1)
- Digital Denture Workflows (CP2)
- Cone Beam Basic Training (CB1)
- Advanced Cone Beam Diagnostics (CB2)
- Introduction to Sleep Medicine (CB3)
- Fundamentals of Endodontic Therapy (CE1)
- Advanced Concepts in Endodontics Therapy (CE2)
- Fundamentals of Implant Planning & Surgery (CI1)
- Fundamentals of Oral Surgery for the General Practitioner (CI7)
- Fundamentals of Guided Implant Surgery with Cone Beam (CI2)
- Hard and Soft Tissue Grafting in Digital Dental Implant Dentistry (CI3a)
- Advanced Hard and Soft Tissue Grafting in Digital Dental Implant Dentistry (CI3b)
- Treating Soft Tissue Defects Around Teeth and Implants (CI3c)
- Digital Full Arch Dental Implant Therapy (CI4)
- Implants in the Esthetic Zone (CI5)
- Comprehensive Digital Implant Workflow: Plan, Print, Place, and Restore (CI6)
- Fundamentals of Clear Aligner Therapy (CO1)
- Advanced Understanding in Clear Aligner Therapy (CO2)